Alumold-500 aluminum alloy injection mold material

Alumold-500 aluminum alloy has the following characteristics in hot forming molds:

Alumold-500 chemical composition:

Cu: 0.15-0.4

Si :0.4-0.8,

Fe: 0.7-,0.13

Mn0.15-0.50,

Mg: 0.8-1.2

Zn: 0.25-0.50

Cr: 0.04-0.35

Ti: 0.15

Density is 2.72g/cm3

Mechanical properties:

Tensile strength (25°CMPa)

Yield strength (25°CMPa)

Hardness 500kg force 10mm ball

Elongation 1.6mm (1/16in) thickness

Note: Longitudinal mechanical properties of pipe at room temperature

Different properties in different states.

Good welding performance: Alumold-500 aluminum alloy has good welding performance and can facilitate welding operations. It can provide high-quality welds and ensure that the structure after welding is stable and reliable.

High hardness application characteristics: Alumold-500 aluminum alloy has high hardness characteristics and is suitable for applications requiring wear resistance, impact resistance and pressure resistance. This high hardness allows it to have excellent performance in thermoforming molds and can withstand high temperature and pressure working environments.

Based on the above characteristics, Alumold-500 aluminum alloy is widely used in injection molds, blow molds and thermoforming molds. In these applications, materials need to have good welding properties and high hardness to meet the manufacturing and use requirements of the mold.